Load data for 9 x 20 VGW + .355 | 105gr | Lehigh Defense Controlled Fracturing

Recommended Powder(s): Hodgdon HP38, Hodgdon TiteGroup, Maxam CSB 5, Rottweil P 801, Vihtavuori N310

Load Specifications

(Use the Personalized Load Calculator below to adjust )

Bullet:	.355 \| 105gr \| Lehigh Defense Controlled Fracturing
Manufacturer SKU:	02355105SP
Bullet Weight:	105gr \| 6.8g
Bullet Diameter:	0.355" \| 9.02mm
Bullet Length:	0.650" \| 16.5mm
Caliber:	9 x 20 VGW load data
Case Length (l3):	0.786" \| 20.0mm
Cartridge Length (C.O.L.):	0.994" \| 25.3mm
Seated Depth:	0.442" \| 11.2mm
Shank Seated Depth:	0.401" \| 10.2mm
Case Capacity:	15.2 Grains of Water \| 0.99 cm³
Primer Size:	Small Pistol (SP)
Max. allowed Pressure:	43511 psi \| 3000 bar
LID:	LID_B11033_C1231
Last updated:	2025-11-04
Recommended Twist Rate:	1:23 - 1:20

Load data for 70 loads in caliber 9 x 20 VGW with .355 | 105gr | Lehigh Defense Controlled Fracturing bullet and 35 powders such as Hodgdon HP38, Hodgdon TiteGroup, Maxam CSB 5, Rottweil P 801, Vihtavuori N310. The key underlying parameters are shown in the table above.

Important Notice: DO NOT go below Minimum Charge or above Maximum Charge unless there are reasons. Since xxlreloading.com has no control over the equipment and components used by the customer and the data used in connection with the website, any responsibility and liability for the results achieved is rejected. Also see our Terms of Service.

Questions regarding the load data: Please read the information in the next tab "Explanations".
A load must fulfill certain criteria to be listed in the default view below - see "powder criteria to fulfill to be listed".

Our load data might deviate from other sources - see the "most common reasons for deviations".

All loads are based on the bullet and case dimensions shown under "Load Specifications" - see "reloading suggestions" if you deviate.

You can set your specifications in the "Personalized Load Calculator".

Go to the bottom of the "Dashboard " page to set the measure system (imperial vs. metric)
No data yet
C.O.L. (Inch)
C.O.L. (mm)
We recommend you limit powder range to relevant brands to speed up re-calculation of results
Use the Personalized Load Calculator to customize loads to your own specific requirements. Find more details in the help section.

Our default view only displays powders/loads that fulfill certain criteria: Max pressure of a load <=90% of Max. Standardized Pressure. Fill Rate (Min FR): >80% and <100% for rife loads, >60% and <100% for pistol loads. Min. Propellant Combustion (Min z): >90% for rifle loads , >80% for pistol/revolver loads. Relax these criteria at your own risk to potentially get more powders shown in the load tables.
Case Length (Inch)
Case Length (mm)
CaseCapacity (GoW)
Min z (%)
Min FR (%)
Max FR*
Barrel Length (Inch)
Barrel Length (cm)
Safety Buffer (%)
.

Click on the desired row in the tables below to add a specific load / powder to your Diary and manage there.

Powder	Charge	FR	MaxP	%	V(0)	z
ADI AP 70N	<<locked>>	95%	18463	42%	**5	93%
ADI APS 350	<<locked>>	96%	24714	57%	**6	100%
ADI APS 450	<<locked>>	95%	23061	53%	**9	100%
ADI AS 30	<<locked>>	97%	17666	41%	**3	100%
ADI AS 50N	<<locked>>	96%	18130	42%	**9	97%
Accurate Solo 1000	<<locked>>	93%	18753	43%	**3	97%
[Accurate Solo 1250]*	<<locked>>	97%	13909	32%	**7	85%
[Alliant BULLSEYE]*	<<locked>>	96%	20508	47%	**5	86%
[Alliant Sport Pistol]*	<<locked>>	94%	23221	53%	**4	86%
Baschieri & Pellagri 100	<<locked>>	97%	16462	38%	**0	94%
Hodgdon Clays	<<locked>>	96%	24758	57%	**9	100%
Hodgdon HP38 👍	<<locked>>	95%	34330	79%	**79	99%
Hodgdon TiteGroup 👍	<<locked>>	90%	36970	85%	**79	100%
[Hodgdon Universal]*	<<locked>>	96%	14750	34%	**6	89%
[Hodgdon CFE Pistol]*	<<locked>>	95%	13982	32%	**0	86%
Lovex D032	<<locked>>	83%	36114	83%	**37	96%
Lovex S011	<<locked>>	97%	27441	63%	**8	97%
[Maxam CSB 1]*	<<locked>>	94%	11864	27%	**1	83%
[Maxam CSB 2]*	<<locked>>	95%	9456	22%	**1	87%
Maxam CSB 3	<<locked>>	97%	15360	35%	**3	93%
Maxam CSB 4	<<locked>>	95%	16650	38%	**3	97%
Maxam CSB 5 👍	<<locked>>	95%	19203	44%	**2	100%
Ramshot Zip	<<locked>>	95%	32416	75%	**70	98%
ReloadSwiss RS 12	<<locked>>	95%	12908	30%	**9	96%
Rottweil P 801 👍	<<locked>>	97%	18304	42%	**8	100%
[SNPE Vectan BA 9]*	<<locked>>	95%	17825	41%	**0	87%
SNPE Vectan BA10	<<locked>>	96%	27137	62%	**2	100%
[SNPE Vectan BA9 1/2]*	<<locked>>	96%	15360	35%	**3	87%
Shooters World Clean Shot	<<locked>>	83%	36114	83%	**37	96%
Shooters World Ultimate Pistol	<<locked>>	91%	39044	90%	**68	96%
Somchem S121	<<locked>>	90%	38682	89%	**81	98%
Vihtavuori N310 👍	<<locked>>	96%	27209	63%	**1	100%
Vihtavuori N320	<<locked>>	95%	15040	35%	**3	96%
[Vihtavuori N330]*	<<locked>>	95%	13431	31%	**7	86%
Winchester 231	<<locked>>	95%	24482	56%	**1	96%

Max Load - Barrel Length: 5.50''

Powder	Charge	FR	MaxP	%	V(0)	z
[ADI AP 70N]*	<<locked>>	73%	9747	22%	**1	82%
ADI APS 350	<<locked>>	63%	11081	25%	**6	100%
ADI APS 450	<<locked>>	61%	9877	23%	**6	99%
ADI AS 30	<<locked>>	69%	8934	21%	**6	94%
[ADI AS 50N]*	<<locked>>	68%	8978	21%	**9	86%
[Accurate Solo 1000]*	<<locked>>	68%	9935	23%	**6	88%
[Accurate Solo 1250]*	<<locked>>	87%	10907	25%	**2	81%
[Alliant BULLSEYE]*	<<locked>>	87%	16491	38%	**3	82%
[Alliant Sport Pistol]*	<<locked>>	84%	17303	40%	**9	81%
[Baschieri & Pellagri 100]*	<<locked>>	73%	8804	20%	**6	83%
Hodgdon Clays	<<locked>>	63%	11066	25%	**3	100%
[Hodgdon HP38]*	<<locked>>	62%	12096	28%	**1	86%
[Hodgdon TiteGroup]²	<<locked>>	59%	13489	31%	**7	96%
[Hodgdon Universal]*	<<locked>>	81%	9747	22%	**1	82%
[Hodgdon CFE Pistol]*	<<locked>>	83%	10298	24%	**8	80%
[Lovex D032]*	<<locked>>	62%	16186	37%	**4	85%
[Lovex S011]*	<<locked>>	62%	10080	23%	**6	81%
[Maxam CSB 1]*	<<locked>>	91%	10965	25%	**8	81%
[Maxam CSB 2]*	<<locked>>	85%	7484	17%	**6	81%
[Maxam CSB 3]*	<<locked>>	73%	8383	19%	**3	82%
[Maxam CSB 4]*	<<locked>>	71%	8818	20%	**9	87%
Maxam CSB 5	<<locked>>	66%	8949	21%	**6	96%
[Ramshot Zip]*	<<locked>>	62%	11516	26%	**8	84%
[ReloadSwiss RS 12]*	<<locked>>	71%	6585	15%	**9	84%
[Rottweil P 801]*	<<locked>>	63%	6396	15%	**3	88%
[SNPE Vectan BA 9]*	<<locked>>	83%	13271	30%	**1	81%
SNPE Vectan BA10	<<locked>>	64%	12140	28%	**9	100%
[SNPE Vectan BA9 1/2]*	<<locked>>	83%	11327	26%	**1	82%
[Shooters World Clean Shot]*	<<locked>>	62%	16186	37%	**4	85%
[Shooters World Ultimate Pistol]*	<<locked>>	63%	14750	34%	**3	81%
[Somchem S121]*	<<locked>>	61%	13402	31%	**0	84%
Vihtavuori N310	<<locked>>	62%	9848	23%	**9	100%
[Vihtavuori N320]*	<<locked>>	71%	7876	18%	**9	85%
[Vihtavuori N330]*	<<locked>>	86%	10515	24%	**8	81%
[Winchester 231]*	<<locked>>	63%	9616	22%	**9	81%

Start Load - Barrel Length: 5.50''

Any powder missing? Then click here.

FR ... fill rate of the cartridge in percent

MaxP ... max. pressure of load in psi or bar

% ... max. pressure of load in percent of the maximum allowed pressure for this caliber

V(0) ... muzzle velocity in feet per second (fps) or meters per second (m/s)

z ... powder burnt in percent

[...] *... not dangerous but load has suboptimal powder burnt with possible characteristics such as extensive muzzle flash or inaccurate loads.

[...] ²... fill rate low - you might want to consider using a filler to ensure proper ignition.

[...] ᴾ... possible press load - work up slowly to this load while watching for signs of excessive pressure.

👍 ... recommended powder/load for this caliber and bullet combination based on its ballistic performance.

<<locked>>... you need to buy an access license to unlock the data